| |
|
 |
|
| |
|
Linksys PAP2T
______________
Linksys SPA-2102
______________
Linksys
WRTP54G
______________
Linksys WIP300
______________
Karry-K1010
______________
Linksys
SPA-9000
______________
Linksys
SPA-941
______________
Linksys
SPA-942
______________
Linksys SPA-3102
______________
Configuration
Guide
______________ |
|
|
|
Linksys PAP2T
The Linksys Phone Adapter enables use of our high-quality
feature-rich telephone service through your cable or DSL
Internet connection. Just plug it into your home Router or
Gateway and use the two standard telephone jacks to connect your
existing phones or fax machines. Each phone jack operates
independently, with separate phone service and phone numbers --
like having two phone lines. With Afxisi VoIP, you'll get clear
telephone reception and reliable fax connections, even while
using the Internet at the same time for normal data operations.
STEP 1
You must first determine what IP address it received. To do
this, you need to pick up the phone attached to the Line 1 jack
and dial:
**** (four asterisks)
then dial: 110 #
and you will be told the IP address of your device (e.g.
192.168.0.100)
STEP 2
Go to any browser equipped computer on your network and
enter the address:
http://<IP ADDRESS>/
(where <IP ADDRESS> is replaced by the address that was given to
you in STEP 1.
STEP 3
Click on the "Admin Login" button near the top right side of
the screen, then click on the "Line 1" tab.
STEP 4
You need to modify only a few parameters from the factory
default. They are listed here:
Proxy: sip.afxisi.com
Display Name: Enter your Full name, this will show
up as part of your callerid.
User ID: Enter the phone number you chose when you signed
up for Afxisi VoIP service.
Password: Enter the password that you chose when
you signed up for Afxisi VoIP service.
Register Expires: 3600
STEP 5
To save bandwidth, you can change Line 1 "Preferred Codec"
to G729a. Also change the "Use Pref Codec Only" to No. You can
only do this for one line. So, if Line 1 is on G.729a, Line 2
has to be some other codec.
STEP 6
Click on the "Save Settings " button at the bottom of the
form.
STEP 7
Make calls!
|
|
Please note: Your
continued use of this
Web site constitutes
notice to you and your
acceptance of the Terms
of Use and Privacy
Policy on the latest
revision dates shown
below.
Terms of Use (Rev.
Aug-07).
Privacy Policy (Rev.
Mar-06).
© Copyright
2007 Afxisi Technology
Services (P) Ltd. All
rights reserved. |
|